H&R OE Sport Springs lower your vehicle subtly, giving it a slightly more aggressive stance without radically changing its appearance. Designed to enhance front-to-rear balance and street handling performance, OE Sport Springs take the "wallow" out of the stock suspension, providing a more controlled feel and improved ride characteristics. All this while retaining the ride comfort you're accustomed to with added confidence.

The most popular spring in H&R's line-up, Sport Springs will lower your vehicle an average of 1.5 - 2 inches (depending upon the make and model of your vehicle) for a lower center of gravity, improved handling and a more aggressive appearance. Sport springs feature more control than that of the OE Sport spring, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use.

For the discerning enthusiast that wants the ultimate in performance and an aggressive look, H&R Race Springs are the perfect solution. H&R Race Springs will lower your vehicle approximately 1.75-2.5 inches (depending on the make and model of your vehicle) and should be matched with high-quality, sport-tuned shock absorbers. Camber correction may be necessary, for H&R camber solutions check H&R's Triple C Camber Adjustment Bolt application guide.

  
H&R produces a number of high quality truck raising spring kits. Featuring progressive rates and the same top-of-the-line engineering and performance of all H&R products, the H&R truck raising spring kits are among the best in the industry.

H&R standardized I.D. Race Springs are the leading choice of motorsports professionals world wide.

H&R 2.50" I.D. Race Springs are wound from a special spring steel that has a higher tensile strength, providing clear performance to weight ratio advantages over competitive race springs. The special 54SiCr6 spring steel allows H&R 2.50" I.D. Race Springs to be on average 15% lighter and have 10% more travel for any given spring rate due to its stronger, more resilient nature. Main springs range from 6" to 16" (25.4 mm = 1 inch) in length and are available in a wide selection of spring rates.

H&R also carries a complete line of 60mm I.D. main and tender springs. Main springs range from 100 mm to 300 mm in length and 30 N to 700 N (N/mm x 5.709 =pounds/inch) in spring rate. Tender springs vary in length from 40 mm to 130 mm, with numerous spring rates available.