Drivetrain (Clutch) - Clutches Flywheels and Drivetrain Components

You are here: Home > Drivetrain (Clutch)

Select your product category to view products in the Drivetrain subcategory. You will be given a list of available products for your car. Click on the more info button to learn more detail about that product. When you are ready to make a purchase, click on the 'add to cart' button to begin your secure checkout process.

ACT

Drivetrain (Clutch) for ACT. Heavy Duty Clutches, Pressure Plates, Race Discs, XACT Flywheels, Xtreme Duty Clutches, Xxtreme Duty Clutches

Centerforce Clutches

Centerforce Dual Friction Clutches Generate up to a 90% increase in holding capacity over stock systems. This clutch/disk set is designed for use with engines producing high horsepower and torque output, and radically altered high performance street vehicles. All Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance. CENTERFORCE® clutch systems are designed with the diverse needs of the customer, or end user in mind. Because of these diverse needs, Centerforce® offers a multilevel line to meet the requirements of a wide range of vehicles and their intended uses. To obtain the proper system, it is extremely important to completely qualify and verify the vehicle, not only by its make and model year, but also "define" its intended use. A stock vehicle used for commuting to and from the work place has an entirely different requirement than a "high performance" vehicle driven at the extreme of its capabilities, and sometimes beyond!

Clutch Discs

Clutchmasters FX100 - FX500 Stage I - V Clutches

If you are looking for the best performing, highest quality clutches available, then Clutch Masters is what you have been looking for. What makes Clutch Masters different? It starts with a 20-thousandths stainless steel backing on the backside of the friction material. This helps to transfer heat from the lining to minimize clutch fade and ensure consistent performance. From there, they use a modified fulcrum point to increase pressure on the disc but without a substantial increase in pedal pressure as seen with other clutch brands. This is also important in protecting against the destruction of the crankshaft from excessive pressure on the thrust bearing which can happen when the pedal pressure is excessive. Some Extreme duty clutches can push the crankshaft a few thousandths of an inch forward when the clutch is depressed. This is not good at 8000 RPM. Lastly, the pressure plate utilizes a ductile iron casting which gives a much higher burst strength than other grey-iron castings. This gives you the peace of mind that the clutch will not be riding in the seat with you under high rpm use.

Driveshaft Loops

Competition Engineering Drive shaft Loops, Lakewood Suspension Drive shaft Loops, Summit Racing Drive shaft Loops.

Exedy Clutches and Flywheels

Exedy Corporation of Japan (formerly known as Daikin Manufacturing Company) is the largest independent OEM supplier of clutches in Japan. Exedy supplies all of the major Japanese vehicle makers and to Ford and GM in the US. Exedy is also the leading manufacturer of racing clutches in Japan and supply all six factory vehicle manufacturer race teams.

All Exedy racing and performance clutches are engineered, designed and built from the ground up as race clutches, not rebuilt from stock clutches that have been modifed.

All of Exedy pressure plate castings are made from ductile (nodular anti-burst) iron for your safety. None of Exedy pressure plates are made of grey cast iron as are many stock pressure plates that are rebuilt in to "performance clutches". Beware, cheap grey iron rebuilt pressure plate castings may explode, unlike nodular iron.

Fidanza Clutch Flywheels and CV Shaft

Fidanza CV Shaft , Fidanza Flywheels, Fidanza Five Point Four Clutch Kit, Fidanza Four Point Three Clutch Kit, Fidanza Steel Friction Insert, Fidanza Three Point Two Clutch Kit, Fidanza Two Point One Clutch Kit.

Ram Clutches and Powergrip Clutch Sets

RAM Flywheels, Ram Powergrip Clutch Sets.

RPS Clutches and Flywheels

RPS Carbon Clutches, RPS Flywheels, RPS Max Clutche, RPS Sport Clutches.

SPEC Clutches

These SPEC Clutches are a great alternative to other applications. They are available in many stages :

Stage One: High clamp pressure plate, steel-backed woven organic disk, bearings and tool.
Stage Two: High clamp pressure plate, segmented chatter-free Kevlar disc, bearings and tool.
Stage Three: High-clamp pressure plate, 3-piece disc with carbon or ceramic material, bearings and a tool. ULTIMATE STREET/STRIP CLUTCH! Sharp but smooth engagement with light pedal.
Stage Four: High-clamp pressure plate, 2-piece rigid disc, bearings and a tool. Available in 3 or 6 wing design for serious road racing and drag racing.
Stage Five: High-clamp load pressure plate, iron disc, bearings and a tool.

Dont see what you are looking for? Message us and we'll get you a quote asap!

Spec Clutches are built to order. Lead time is 3 days from purchase, after which time it will be shipped to you.

Blitz

Clutch Accessories

Clutch Kits

Flywheels

Pressure Plates

Sort By:

Page of 4

AASCO Flywheels 86-89 Acura Integra 1.6L, Includes ZC Engines (ZC w/o Pilot Bearing & 22mm Crank Snout) (7lbs.) 10-0101-11

List Price: $303.84
Our Price: $303.84